Vikas Machinery & Automobiles
Station Plot, Rajkot, Gujarat
GST No. 24ACMPM5005F1ZW
08048966732 46% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Workshop Machinery
| Horse Power | 3-5 HP |
| Brand | Delson |
| Maximum Flow Rate | 501 - 1000 cfm |
| Cooling Method | Air Cooled |
| Frequency | 50/60 Hz |
| Voltage | 420V |
| Model Number | DL-430 |
Facilitated by technically advanced process, we are presenting a distinguished collection of Air Compressor. Our offered compressor is manufactured by utilizing finest quality raw-material and highly developed technology by our vendors’ engineers. In order to make sure quality, it is meticulously tested on different parameters by our quality experts. Moreover, we offer this compressor to our clients in different specifications and at industry leading prices.
Features:
Rugged construction
Optimum performance
Long service life
| Material | Stainless Steel |
| Production Capacity | 220 lbs |
| Usage/Application | Industrial |
| Accuracy | 80 inch |
| Table Diameter (mm) | 160 |
| T-Slot Width (mm) | 10 |
| Voltage | 240V |
| Power Source | Electric |
| Frequency | 60 Hz |
| Country of Origin | Made in India |
A rotary desk is the revolving plate at the rig's drill ground that turns the drill string in a clockwise course. The rotary table surrounds the 4 or six-sided kelly bushing and kelly force to which the drill string is hooked up, moving the strength from the rig's force device to the drill string and bit.
The rotary table hyperlinks the rig's strength deliver to the drill string, it may be described as a capture. most rigs have a rotary desk due to the fact the top mover for the drill string, however, top strength structures that permit continuous rotation of the drill string have changed the rotary desk, the kelly bushing and the kelly strain in a few rigs, because of changes in trenchless construction requirements.
The rotary force table is familiar in pinnacle-pressure rigs, that is, those who have their pressure motor at the top of the rig. Drill string sections are first linked to the bottom hole assembly. As drill string sections bypass into the bore, extra sections of drill string are connected to the pinnacle strain motor and to sections inside the bore, constructing the drill string from the top. the ones sections of drill string screw collectively the usage of a clockwise movement. The rotary desk -- which turns clockwise -- is used to tighten the segments of the drill string.
| Capacity | Approx 10 ton |
| Material | Mild Steel |
| Surface Treatment | Color Coated |
| Height | Approx 1500 mm |
| Automatic Grade | Manual |
fly press
*Your information is safe with us.
| Automation Grade | Fully Automatic |
| Power Source | Hydraulic |
| Frequency | 50/60Hz |
| Phase | Three Phase |
| Body Material | MS |
| Brand | Unique |
| Width of Jaws | 150 mm |
| Depth of Jaws | 60 mm |
| Length Overall | 560 mm |
| Width Overall | 250 mm |
| Weight | Approx 45 Kg |
| Product Code | U3310 |
| Tenon Slot Size | 20 mm |
| Accuracy in Squareness within | 0.02/100 mm |
| Opening of Jaws | 300 mm |
| Height Overall | 155 mm |
| Clamping Force | 3500 KGF |
Features:
Rigid material vise body of ductile Iron
Hydraulic Cylinder of alloy steel hardened, ground and Lapped
Jaws made of alloy steel properly hardened
Fixed jaws is provided with vertical and horizontal V grooves to hold the round job firmly
supplied with stopper for fast production
| Brand | Unique |
| Product No | U351 |
| Spindle Taper | 9 Degree |
| Overall Height Vertical Position | 180-290 mm |
| Width of Base | 115-180 mm |
| Gear Worm Ratio | 1 Ratio 40 |
| Center Height | 115-190 mm |
| Spindle Bore | 20-50 mm |
| Length of Base | 180-270 mm |
| Weight | 40-98 Kg |
*Your information is safe with us.
| Material | Mild Steel |
| Brand | Unique |
| Length Overall | 210-535 mm |
| Height Overall | 95-225 mm |
| Weight | 4-73 Kg |
| Width of Jaws | 50-200 mm |
| Depth of Jaws | 25-60 mm |
| Product Code | U312 |
| Usage/Application | Industrial |
| Material | MS |
| Surface Treatment | Color Coated |
| Max Cutting Thickness | 3 - 15 mm |
| Cutting Diameter | Available in 300mm, 350mm and 400mm |
| Usage/Application | Milling Cutter |
| Hardness | 50-60 HRC |
| Packaging Type | Box |
| Tolerance | +/-0.01mm |
| Model Number | HR-2 |
Owing to perfection and quality oriented approach, we have carved niche in the industry by offering an enormous grade range of Tapping Attachment. Offered attachment is manufactured using high quality factor input and latest technology by our vendors’ skilled professionals. To make sure quality, it is strictly tested on different parameters. Clients can avail this attachment from us in diverse sizes and other related specifications, as per their requirements.
Features:
Low maintenance cost
Rust resistance body
High operational fluency
*Your information is safe with us.
| Material | MS |
| Automation Grade | Automatic |
| Machine Structure | Vertical |
| Power Source | Electric |
| Motor Power | 2-3 HP |
| Brand | Unique |
| Length Overall | 260 mm |
| Height Overall | 115 mm |
| Weight | 4-5 Kg |
| Depth of Jaws | 50 mm |
| Width Overall | 100 mm |
| Opening of Jaws | 85 mm |
| Body Material | Ductile Iron |
| Width of Jaws | 75 mm |
| Type of Grinding Machine | Surface |
| Automation Grade | Manual |
| Country of Origin | Made in India |
*Your information is safe with us.
| Type of Grinding Machine | Surface |
| Automation Grade | Manual |
| Country of Origin | Made in India |